Get 10% OFF

Introducing the Ibexx Primary GOAT Bolt. We all know of the failure prone primary clutch bolt, whether its from high horsepower applications or just fatigue over time, this is the solution to those problems. The OEM primary bolt is a torque to yield meaning it should be replaced after each time it has been torqued down. The Ibexx primary bolt can be used and re-used as much as you'd like. Never worry about buying a replacement primary bolt again! The last bolt you will ever need is right here!..... Did we mention, the GOAT bolt doubles as a primary clutch PULLER?! You read that right, our primary bolt is also a primary clutch puller! With a simple attachment your primary bolt is now an essential tool for maintenance.

Available for 2017+ Can am X3 including the P-drive clutch.

• Thickest bolt on the market at 2.5mm larger than stock

• 2.5mm larger than stock equates to 155% more torque value

• Guaranteed to be the strongest bolt on the market constructed from ARP 2000 with a clamp load of up to 220,000 PSI

• Works with Torque spreader for high horsepower machines

Two variations available

 

High-TQ Bolt - Torques to 118 ft lbs.

• Primary bolt only

• Utilizes the OEM washer

• Puller attachment sold separate -See check box below the drop downs to order the puller pin

• No modifications to the OEM clutch cover

 

GOAT Bolt and Puller- Torques to 130 ft lbs.

• Includes ultimate strength beveled washer - thicker and stronger than the OEM washer

• clutch puller attachment

• Plug for the OEM clutch cover

• T60 Torx socket
• Grease packet- When using the puller attachment you must grease the attachment before inserting into the bolt!
  
  
  The High-TQ bolt is available now! The GOAT bolt clutch cover mod is coming soon!  
  
  Note: The GOAT primary bolt is a race application that does require modifications to the OEM clutch cover for fitment purposes. The High-TQ bolt does not require any modifications.